Ferro Max Tube
For thin wall tubes without deformation of the wall
Application | Cuts thin walled tubes |
---|---|
Machines | Cold saw machine Vc = 100 m/min - 200 m/min f z = 0.03 mm - 0.05 mm |
Material | Carbon steel, alloy steel Tensile strength 400 - 600 N/mm2 |
EdgeMaterial | Cermet |
Features & Benefits
•To avoid the swarf adhesion into the gullet, the number of teeth in the cut should be less than 3
•The many more and tooth geometry reduce material deformation
•Cuts very clean with high dimensional accuracy
Size
Size | Pin holes | ||||
---|---|---|---|---|---|
D | B | b | d | z | |
250 | 2.0 | 1.70 | 32 | 100 | 4/11/63 |
250 | 2.0 | 1.70 | 32 | 100 | 4/9/50 |
250 | 2.0 | 1.70 | 32 | 120 | 4/11/63 |
250 | 2.0 | 1.70 | 32 | 120 | 4/9/50 |
250 | 2.6 | 1.70 | 40 | 60 | 4/10.8/90 |
285 | 2.0 | 1.70 | 32 | 120 | 4/11/63 |
285 | 2.0 | 1.70 | 32 | 140 | 4/11/63 |
285 | 2.0 | 1.75 | 40 | 120 | 2/10.8/80 |
285 | 2.0 | 1.75 | 40 | 140 | 2/10.8/80 |
300 | 2.0 | 1.75 | 40 | 150 | 2/8/55+4/14/64 |
350 | 2.5 | 1.70 | 32 | 120 | 4/15/80 |
350 | 2.5 | 2.25 | 50 | 130 | 4/15/80 |
360 | 2.5 | 2.25 | 40 | 130 | 4/10.8/90 |
360 | 2.5 | 2.25 | 50 | 160 | 4/16/80 |