Micro Finger Joint Cutter Head
HS-HP Micro Finger Joint Cutter Head
•Advanced Material Technology cutting edges outlast conventional tooling 3-5 times enabling longer machine run time and less grinds per month
| Application | Millwork finger joints |
|---|---|
| Machines | Batch feed and through feed machines ＊Cutting off saw or hogging unit is indispensable for the Micro Finger |
| Material | Softwoods |
| EdgeMaterial | HS-HP |
Features & Benefits
•Advanced Material Technology cutting edges outlast conventional tooling 3-5 times enabling longer machine run time and less grinds per month
•Cuts cleaner because of Advanced Material Technology
•Holds about same flexural strength as 11.4mm length standard finger joints with much higher yield and contribution to the environment
•Advanced Material Technology (HS-HP) reduces power consumption and cutting noise for better sustainability and working environment
•Finger block tooth can be reground around 3mm, contributing to edge material saving and reduction of total running cost
Size
Heads
| Size | Type | |||
|---|---|---|---|---|
| D | B | d | z | |
| 149 | 25.6 | 50 | 2+2 | MZ |
| 160 | 25.6 | 50 | 2+2 | MZ |
| 170 | 25.6 | 50 | 3+3 | MZ |
| 170 | 25.6 | 50 | 3+3 | MZ |
Inserts
| Size | Finger joint length L | Pitch t | Number of fingers＊ | Type | ||
|---|---|---|---|---|---|---|
| W | L | T | ||||
| 25 | 36 | 13 | 3.5/4.5 | 1.6 | 16 | MZ |
＊Number of fingers when set in the head
