Board Pro Scoring
Scoring Saw Blade
•Scoring of laminated panel material to avoid tear outs on the bottom
| Application | Scoring of laminated panel material to avoid tear outs on the bottom |
|---|---|
| Machines | Beam saw, vertical panel saw, table saw |
| Type | TP, F, BC, CA |
| Material | Core : Particleboard, MDF, HDF Lamination : Melamine, paper, foil |
| EdgeMaterial | HW |
Features & Benefits
•Optimum scoring depth is 1.5 mm - 2.5 mm
•Cutting width of CA-type is adjusted with shims
Size
| Size | Type | Pin holes | |||||
|---|---|---|---|---|---|---|---|
| D | B | B1 | b | d | z | ||
| 100 | 3.0 | 4.0 | 2.6 | 20 | 20 | TP | |
| 100 | 2.8 | 3.6 | 2.0 | 22 | 24 | TP | |
| 120 | 3.1 | 4.3 | 2.8 | 20 | 24 | TP | |
| 125 | 3.1 | 4.3 | 2.8 | 20 | 24 | TP | |
| 125 | 4.4 | 5.6 | 3.4 | 20 | 24 | TP | |
| 125 | 3.1 | 4.3 | 2.8 | 22 | 24 | TP | |
| 125 | 4.4 | 5.6 | 3.4 | 45 | 24 | TP | |
| 125 | 4.4 | 5.2 | 3.2 | 45 | 20 | TP | |
| 125 | 4.4 | 5.45 | 2.8 | 20 | 24 | TP | |
| 127 | 4.4 | 5.6 | 3.4 | 22 | 24 | TP | |
| 127 | 3.8 | 5.0 | 2.8 | 45 | 24 | TP | |
| 127 | 4.0 | 5.2 | 3.4 | 45 | 24 | TP | |
| 127 | 4.3 | 5.6 | 3.3 | 45 | 24 | TP | |
| 140 | 3.1 | 4.3 | 2.8 | 16 | 32 | TP | 1/6/33 |
| 140 | 4.4 | 5.6 | 3.4 | 45 | 28 | TP | |
| 150 | 3.0 | 4.0 | 2.6 | 30 | 28 | TP | |
| 150 | 4.0 | 5.2 | 3.4 | 30 | 28 | TP | |
| 150 | 4.2 | 5.4 | 3.4 | 30 | 28 | TP | |
| 150 | 4.4 | 5.6 | 3.4 | 30 | 28 | TP | |
| 150 | 4.4 | 5.6 | 3.4 | 30 | 28 | TP | |
| 150 | 4.4 | 5.6 | 3.4 | 45 | 28 | TP | |
| 160 | 3.1 | 4.0 | 2.6 | 20 | 32 | TP | |
| 160 | 4.4 | 5.6 | 3.2 | 30 | 28 | TP | |
| 160 | 4.4 | 5.6 | 3.2 | 45 | 28 | TP | 3/11/70 |
| 160 | 4.4 | 5.6 | 3.4 | 55 | 36 | TP | 3/7/66 |
| 160 | 4.4 | 5.45 | 3.0 | 45 | 36 | TP | 3/11/70 |
| 175 | 4.6 | 5.8 | 3.5 | 45 | 28 | TP | |
| 180 | 3.1 | 4.3 | 2.8 | 16 | 42 | TP | 1/6/33 |
| 180 | 4.4 | 5.6 | 3.4 | 20 | 28 | TP | |
| 180 | 4.4 | 5.6 | 3.4 | 30 | 28 | TP | 2/7/42+2/10/60 |
| 180 | 4.8 | 5.8 | 3.5 | 45 | 36 | TP | |
| 180 | 4.4 | 5.6 | 3.2 | 45 | 36 | TP | |
| 180 | 6.8 | 7.8 | 5.0 | 20 | 36 | TP | |
| 200 | 4.8 | 5.8 | 3.5 | 45 | 36 | TP | |
| 200 | 5.9 | 6.9 | 3.5 | 45 | 36 | TP | |
| 200 | 6.2 | 7.2 | 4.2 | 45 | 36 | TP | |
| 200 | 3.2 | 4.3 | 2.8 | 30 | 60 | TP | |
| 200 | 4.4 | 5.6 | 3.2 | 30 | 36 | TP | 2/8.5/60 |
| 200 | 4.8 | 5.8 | 3.5 | 30 | 36 | TP | 2/8.5/60 |
| 200 | 4.0 | 5.2 | 3.4 | 20 | 24 | TP | |
| 200 | 4.4 | 5.6 | 3.2 | 20 | 36 | TP | |
| 200 | 4.4 | 5.6 | 3.4 | 20 | 24 | TP | |
| 200 | 4.6 | 5.7 | 3.2 | 20 | 34 | TP | |
| 200 | 5.0 | 5.8 | 3.5 | 20 | 36 | TP | |
| 200 | 5.5 | 6.6 | 3.8 | 20 | 36 | TP | |
| 200 | 6.2 | 7.2 | 4.2 | 20 | 36 | TP | |
| 200 | 4.4 | 5.6 | 3.2 | 65 | 36 | TP | 2/9/110+2/9/100 |
| 200 | 4.8 | 5.8 | 3.2 | 65 | 34 | TP | 2/8.5/110 |
| 200 | 4.0 | 5.2 | 3.4 | 30 | 36 | TP | |
| 200 | 4.4 | 5.6 | 3.2 | 50 | 42 | TP | 3/13/80 |
| 215 | 4.4 | 5.6 | 3.2 | 50 | 42 | TP | 3/15/80 |
| 300 | 4.4 | 5.6 | 3.5 | 50 | 48 | TP | 3/15/80 |
| 120 | 3.2 | 4.5 | 2.2 | 22 | 24 | F | |
| 120 | 3.1 | 4.22 | 2.2 | 20 | 24 | F | |
| 125 | 3.2 | 4.3 | 2.2 | 22 | 24 | F | |
| 125 | 4.4 | 5.45 | 3.2 | 45 | 24 | F | |
| 180 | 4.4 | 5.6 | 3.0 | 30 | 34 | F | 2/10/60 |
| 200 | 4.3 | 5.5 | 3.0 | 20 | 24 | F | |
| 280 | 5.0 | 3.5 | 45 | 84 | BC30° | ||
| 300 | 4.6 | 3.2 | 65 | 72 | BC10° | 2/9/110+2/9/100 | |
| 340 | 5.0 | 3.5 | 45 | 48 | BC30° | 3/14/65 | |
| 340 | 5.0 | 3.5 | 45 | 108 | BC30° | 3/14/65 | |
| 80 | 2.8 | 3.6 | 20 | 2x10 | CA | ||
| 100 | 2.8 | 3.6 | 22 | 2x12 | CA | ||
| 100 | 2.8 | 3.6 | 20 | 2x12 | CA | ||
| 110 | 2.8 | 3.6 | 20 | 2x12 | CA | ||
| 120 | 2.8 | 3.6 | 22 | 2x12 | CA | ||
| 120 | 2.8 | 3.6 | 20 | 2x12 | CA | ||
| 120 | 2.8 | 3.8 | 22 | 2x12 | CA | 2/4.6/39+2/4.5/42 | |
| 120 | 2.8 | 3.6 | 50 | 2x12 | CA | 4/6.2/62 | |
| 120 | 2.8 | 3.8 | 50 | 2x12 | CA | 4/6.2/62 | |
| 120 | 4.0 | 5.0 | 50 | 2x12 | CA | 4/6.2/62 | |
| 120 | 4.0 | 4.8 | 22 | 2x12 | CA | ||
| 125 | 2.8 | 3.6 | 20 | 2x12 | CA | ||
| 125 | 2.8 | 3.8 | 50 | 2x12 | CA | ||
| 125 | 4.0 | 4.8 | 45 | 2x12 | CA | ||
| 125 | 4.0 | 5.0 | 50 | 2x12 | CA | ||
| 160 | 2.8 | 3.6 | 30 | 2x16 | CA | ||
| 180 | 2.8 | 3.6 | 30 | 1x18 | CA | ||
| 180 | 4.0 | 4.8 | 20 | 2x20 | CA | ||
| 180 | 4.4 | 5.6 | 45 | 2x20 | CA | ||
| 200 | 4.0 | 5.0 | 50 | 2x28 | CA | ||
