Carbon Steel & Alloy Steel

Ferro Max ST-5

Carbon steel solids (C: ≦0.45 %)

•With higher wear and adhesion resistant tooth tips, it achieves more stable and longer sawing performance for billets with carbon content less than 0.45% and other alloy steels.

Application Cuts solids
Machines Cold saw machine Vc = 70 m/min - 120 m/min f z = 0.05 mm - 0.07 mm
EdgeMaterial Cermet

Ferro Max Ti-4

High carbon steel solids and tubes

•Highly abrasion resistant tungsten carbide edges, treated with a special coating for the longest tool life

Application Cuts solids and tubes
Machines Cold saw machine Vc = 70 m/min - 120 m/min f z = 0.05 mm - 0.07 mm
EdgeMaterial Coated Tungsten Carbide

Special Carbon Alloy Steel

Ferro Max SUS

Special coating up to 100 % longer tool life compared with conventional saw blades for stainless steel cutting

•Due to the special SUS-coating, the lifetime of the Ferro Max SUS can be doubled compared to TA-4SUS when cutting SUS 316 or SUS 304

Application Cuts solids
Machines Cold saw machine Vc = 50 m/min - 70 m/min f z = 0.04 mm - 0.06 mm
EdgeMaterial Coated Tungsten Carbide

Ferro Max Dies

Special coating up to 100% longer tool life compared with Ti-4

•Due to the special coating, the lifetime of Ferro Max Dies can be doubled compared to ST-5 or Ti-4 when cutting SKD11 or SKD61

Application Cuts solids
Machines Cold saw machine Vc = 60 m/min - 80 m/min f z = 0.05 mm - 0.07 mm
EdgeMaterial Coated Tungsten Carbide

Ferro Max Speed

Higner cutting speed for less cycle time and higher productivity

•Ferro Max Speed saw blades can be run with cutting speeds of over 200 m/min, which greatly increase the machine's productivity

Application Cuts solids and tubes
Machines Cold saw machine Vc = 200 m/min - 300 m/min f z = 0.05 mm - 0.08 mm
EdgeMaterial Coated Tungsten Carbide

Ferro Max Speed LC

•Higher cutting speed achieved for low carbon steel. Special coating and carbide edge up to 100% longer tool life.

Application Cuts solids and tubes
Machines Cold saw machine Vc = 200 m/min - 300 m/min f z = 0.05 mm - 0.08 mm
EdgeMaterial Coated Tungsten Carbide

Tube & Pipe

Ferro Max ST-5P

•With high chipping resistant cermet tooth edge, it achieves more stable sawing performance in the harsh condition which triggers damages to tooth edges

Application Cuts solids and tubes
Machines Cold saw machine Vc = 100 m/min - 200 m/min f z = 0.03 mm - 0.06 mm
EdgeMaterial Cermet

Ferro Max Tube

For thin wall tubes without deformation of the wall

•To avoid the swarf adhesion into the gullet, the number of teeth in the cut should be less than 3

Application Cuts thin walled tubes
Machines Cold saw machine Vc = 100 m/min - 200 m/min f z = 0.03 mm - 0.05 mm
EdgeMaterial Cermet

Ferro Max Super Tube

High cutting speed for thin wall tubes

•Ferro Max Super Tube is suitable to cut high tensile strength tube (>800N/mm2) with cutting speed of over 200m/min

Application Cuts thin walled tubes
Machines Cold saw machine Vc = 200 m/min - 300 m/min f z = 0.03 mm - 0.05 mm
EdgeMaterial Coated Tungsten Carbide

Ferro Max SUS Tube

Achieve 10 times longer cutting life compared with Ferro Max Tube in difficult stainless steel tube sawing with newly developed special tooth shape, carbide edge and coating

Application Cuts thin walled tubes
Machines Cold saw machine vc = 50 m/min - 100 m/min f z = 0.03 mm - 0.05 mm
EdgeMaterial Coated Tungsten Carbide

Cutting Oil

Supralube - Oil Lubricant

Kanefusa Lubricant for mist oil for best performance of the saw blades, we recommend original kanefusa lubricant

Application Kanefusa lubricant for mist oil of the saw blades
Machines Cold saw machine