Ferro Max Super Tube
High cutting speed for thin wall tubes
| Application | Cuts thin walled tubes |
|---|---|
| Machines | Cold saw machine Vc = 200 m/min - 300 m/min f z = 0.03 mm - 0.05 mm |
| Material | Carbon steel, alloy steel Tensile strength 600 - 1400 N/mm2 |
| EdgeMaterial | Coated Tungsten Carbide |
Features & Benefits
• Ferro Max Super Tube is suitable to cut high tensile strength tube (＞600N/mm2) with cutting speed of over 200m/min
• To avoid the swarf adhesion into the gullet, the number of teeth in the cut should be less than 3
• The many more and tooth geometry reduce material deformation
• Cuts very clean with high dimensional accurac
Size
| Size | Pin holes | ||||
|---|---|---|---|---|---|
| D | B | b | d | z | |
| 300 | 2.0 | 1.75 | 40 | 130 | 2/8/55+4/14/64 |
| 300 | 2.0 | 1.75 | 40 | 150 | 2/8/55+4/14/64 |
| 350 | 2.5 | 2.25 | 50 | 140 | 4/15/80 |
| 350 | 2.5 | 2.25 | 50 | 160 | 4/15/80 |
| 360 | 2.5 | 2.25 | 50 | 160 | 4/14/80 |
