Circular saw blades, knives and other tools for industries with excellent quality since 1896.
Heavy Duty Rip Saw Blade
•Stable and flat plate enables truer run-out for smoother finish and exact dimensions
| Application | Heavy duty rip sawing and re-sawing |
|---|---|
| Machines | Heavy sawmill equipment such as Linck, HewSaw,EWD, Soederhamn Gang rip saws such as Paul, Raimann |
| EdgeMaterial | HW |
Thin Kerf Splitting Saw Blade
•Thin kerf enables a tremendous increase in yield rates
| Application | Cutting solid timber into thin slats used in the production of parquet flooring, blinds, etc. |
|---|---|
| Machines | Splitting machines such as Weinig, Schroeder,Leadermac |
| EdgeMaterial | HW |
Saw Body Coating
| Application | Special coating on the saw blade body to reduce friction between the saw blade body and solid wood |
|---|
Perfect Finish Saw Blade
•Special tooth shape enables a nearly knife mark free cut finish
| Application | Ripping solid wood in glueline（super finish）quality |
|---|---|
| Machines | Gang rip saw, moulder, table saw |
| EdgeMaterial | HC-UP |
Perfect Finish Sawblade
•Special tooth geometry for very smooth and tooth mark free sawn surface. Three tooth types are available.
| Application | Ripping solid wood in glueline（super finish）quality |
|---|---|
| Machines | Gang rip saw, moulder, table saw |
| EdgeMaterial | HC-UP |
Fine Cross Cut Saw Blade
•Thin kerf enables a tremendous increase in yield rates
| Application | Cross cutting of solid wood |
|---|---|
| Machines | Optimizing saws, cut－off saws |
| EdgeMaterial | HW |
New and improved Panel saw blade
•Longer life time
•Increase sawing stability
•Clean & precise Cutting surface
| Application | Cutting engineered wood such as particle board and MDF |
|---|---|
| Machines | Panel saw |
| EdgeMaterial | HW |
Saw blade for finish-cut, especially for the user requires a high cutting quality on melamine board by using panel saw & running saw machines.
• Reducing chippings on board end.
• Reducing waves on melamine edge.
• Reducing cutting noise
| Application | Cutting melamine board |
|---|---|
| Machines | Panel saw, Running saw, Tenorner |
Finish Cut Panel Sizing Saw Blade
•Special carbide grade, strong both in wear and chipping resistance, is used for perfect sawing of PB and MDF.
| Application | Sizing of panel material in single sheets and stacks |
|---|---|
| Machines | Beam saw |
| EdgeMaterial | HW |
Panel Sizing Saw blade
•Saw blade runs quieter due to vibration damping slits in the plate
•Extreme flat plate and tight manufacturing tolerances enable a truer run out for a better cut quality
| Application | Sizing of panel material in single sheets and stacks |
|---|---|
| Machines | Beam saw |
| EdgeMaterial | HW |
Panel Sizing Saw Blade
•Saw blade runs quieter due to vibration damping slits in the plate
| Application | Sizing of panel material in single sheets and stacks |
|---|---|
| Machines | Beam saw |
| EdgeMaterial | HW |
Scoring Saw Blade
•Scoring of laminated panel material to avoid tear outs on the bottom
| Application | Scoring of laminated panel material to avoid tear outs on the bottom |
|---|---|
| Machines | Beam saw, vertical panel saw, table saw |
| EdgeMaterial | HW |
Hollow Face Panel Sizing Saw blade
•Special carbide grade outlasts conventional grades 2-3 times
•Saw blade runs quieter due to vibration damping slits in the plate
| Application | Sizing of panels in single sheets and stacks in finish cut quality |
|---|---|
| Machines | Vertical panel saw without scoring saw blade |
| EdgeMaterial | HW |
Finish Cut For Table Saw Blade
•Even and straight saw plate
| Application | Sizing of Panel material in finish cut quality |
|---|---|
| Machines | Table saw |
| EdgeMaterial | HW |
• Less machine load with less friction by special surface of the saw blade body.
• Less cutting load leads to better sawing quality.
• Staying sharp edge longer by preventing cutting edge from adhesion of the material.
| Application | Sizing of panel material in single sheets and stacks in finish cut quality |
|---|---|
| Machines | Panel saw, Running saw, Tenorner |
| EdgeMaterial | PCD |
Finish Cut Panel Sizing Saw Blade
•Cutting force is well in balance allowing a truer run out and better cut quality
| Application | Sizing of panel material in single sheets and stacks in finish cut quality |
|---|---|
| Machines | Vertical panel saw with and without scoring saw blade, beams saws, table saws |
| EdgeMaterial | DP |
Heavy Duty Panel Sizing Saw Blade
•Saw blade runs quieter due to vibration damping elements in the plate
•High quality PCD grades from leading PCD manufacturer enable longer edge life
| Application | Sizing of panel material in single sheets and stacks |
|---|---|
| Machines | Beams saws, gang rip saws |
| EdgeMaterial | DP |